Tag Archives: supplier gearbox

China supplier Customized NEMA 23 BLDC DC Gear Geared Motor 24 48VDC Planetary Reduction Gearbox Integrated Driver Brushless DC Motor Power 10W Upto 800W vacuum pump connector

Product Description

 

Customized NEMA 23 BLDC DC Gear Geared Motor 24 48VDC Planetary Reduction Gearbox Integrated Driver Brushless DC Motor Power 10W Upto 800W 

Product Description

Product Name: Brushless DC Motor

Number of Phase: 3 Phase

Number of Poles: 4 Poles /8 Poles /10 Poles

Rated Voltage: 12v /24v /36v /48v /310v

Rated Speed: 3000rpm /4000rpm /or customized

Rated Torque: Customized

Rated Current: Customized

Rated Power: 23w~2500W

Jkongmotor has a wide range of micro motor production lines in the industry, including Stepper Motor, DC Servo Motor, AC Motor, Brushless Motor, Planetary Gear Motor, Planetary Gearbox etc. Through technical innovation and customization, we help you create outstanding application systems and provide flexible solutions for various industrial automation situations.

57mm 36V Brushless DC Motor Parameters:

Specification Unit Model
JK57BLS005 JK57BLS01 JK57BLS02 JK57BLS03 JK57BLS04
Number Of Phase Phase 3
Number Of Poles Poles 4
Rated Voltage VDC 36
Rated Speed Rpm 4000
Rated Torque N.m 0.055 0.11 0.22 0.33 0.44
Rated Current Amps 1.2 2 3.6 5.3 6.8
Rated Power W 23 46 92 138 184
Peak Torque N.m 0.16 0.33 0.66 1 1.32
Peak Current Amps 3.5 6.8 11.5 15.5 20.5
Back E.M.F V/Krpm 7.8 7.7 7.4 7.3 7.1
Torque Constant N.m/A 0.074 0.073 0.07 0.07 0.068
Rotor Inertia g.cm2 30 75 119 173 230
Body Length mm 37 47 67 87 107
Weight Kg 0.33 0.44 0.75 1 1.25
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or below (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude 1000 CHINAMFG or less

Planetary Gearbox Parameters:

56JXE300K
Ring material Metal
Bearing at output Ball bearings
Max. Radial (12mm from flange) 300N
Max. shaft axial load 200N
Radial play of shaft (near to flange) ≤0.08mm
Axial play of shaft ≤0.4mm
Backlash at no-load ≤2.5°
Shaft press fit force, max 300N

 

Motor Shaft Pinion Specifications
Module 1
No. of teeth 12 15 9
Pressure angle 20°
Hole diameter Φ6H7
Reduction ratio 1/4.25  1/15  1/18  1/23  1/52  1/61  1/72  1/96  1/121  1/220  1/260  1/307 1/3.6  1/13  1/43  1/154  1/187 1/5.33  1/28

 

Gearbox Specifications:
Reduction ratio Exact reduction ratio Rated tolerance torque Max momentary tolerance torque Efficiency L (mm) Weight (g)
1/3.6  1/4.25  1/5.33 1/3.6  1/4.25  1/5.33 3 N.m Max 9 N.m 90% 37.8±0.5 489
1/13  1/15  1/18  1/23  1/28 1/12.96  1/15.30  1/18.06  1/22.67  1/28.44 12 N.m Max 36 N.m 0.81 49.5±0.5 681
1/43  1/52  1/61  1/72  1/96  1/121 1/42.69  1/51.84  1/61.20  1/72.25  1/96.33  1/120.89 24 N.m Max 72 N.m 73% 60.8±0.5 871
1/154  1/187  1/220  1/260  1/307 1/153.69  1/186.62  1/220.32  1/260.10  1/307.06 30 N.m Max 90 N.m 0.66 71.9±0.5 1066
Input & output same rotation direction; Motor Max. input speed: <6000rpm; Operating temperature range: -15ºC ~ +80ºC

We support many different Gearbox to customize, such as Planetary Gearbox, High Precision Planetary Gearbox, Worm gearbox, Eccentric Gearbox and so on. If you have any customized requirements, contact us immediately!!!

 

Planetary Gearbox Type:

 

42mm 24V Brushless DC Motor Parameters:

Specification Unit Model
JK42BLS01 JK42BLS02 JK42BLS03 JK42BLS04
Number Of Phase Phase 3
Number Of Poles Poles 8
Rated Voltage VDC 24      
Rated Speed Rpm 4000      
Rated Torque N.m 0.0625 0.125 0.185 0.25
Peak Current Amps 1.8 3.3 4.8 6.3
Rated Power W 26 52.5 77.5 105
Peak Torque N.m 0.19 0.38 0.56 0.75
Peak Current Amps 5.4 10.6 15.5 20
Back E.M.F V/Krpm 4.1 4.2 4.3 4.3
Torque Constant N.m/A 0.039 0.04 0.041 0.041
Rotor Inertia g.cm2 24 48 72 96
Body Length mm
Weight Kg
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or below (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude 1000 CHINAMFG or less

60mm 48V Brushless DC Motor Parameters:

Specification Unit Model
JK60BLS01 JK60BLS02 JK60BLS03 JK60BLS04
Number Of Phase Phase 3
Number Of Poles Poles 8
Rated Voltage VDC 48
Rated Speed Rpm 3000
Rated Torque N.m 0.3 0.6 0.9 1.2
Rated Current Amps 2.8 5.2 7.5 9.5
Rated Power W 94 188 283 377
Peak Torque N.m 0.9 1.8 2.7 3.6
Peak Current Amps 8.4 15.6 22.5 28.5
Back E.M.F V/Krpm 12.1 12.6 12.4 13.3
Torque Constant N.m/A 0.116 0.12 0.118 0.127
Rotor Inertia kg.cm2 0.24 0.48 0.72 0.96
Body Length mm 78 99 120 141
Weight Kg 0.85 1.25 1.65 2.05
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or below (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude 1000 CHINAMFG or less

80mm 48V BLDC Motor Parameters:

Specification Unit Model
JK80BLS01 JK80BLS02 JK80BLS03 JK80BLS04
Number Of Phase Phase 3
Number Of Poles Poles 4
Rated Voltage VDC 48
Rated Speed Rpm 3000
Rated Torque N.m 0.35 0.7 1.05 1.4
Rated Current Amps 3 5.5 8 10.5
Rated Power W 110 220 330 440
Peak Torque N.m 1.05 2.1 3.15 4.2
Peak Current Amps 9 16.5 24 31.5
Back E.M.F V/Krpm 13.5 13.3 13.1 13
Torque Constant N.m/A 0.13 0.127 0.126 0.124
Rotor Inertia g.cm2 210 420 630 840
Body Length mm 78 98 118 138
Weight Kg 1.4 2 2.6 3.2
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or below (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude 1000 CHINAMFG or less

86mm 48V Dc Brushless Motor Parameters:

Specification Unit Model
JK86BLS58 JK86BLS71 JK86BLS84 JK86BLS98 JK86BLS125
Number Of Phase Phase 3
Number Of Poles Poles 8
Rated Voltage VDC 48
Rated Speed Rpm 3000
Rated Torque N.m 0.35 0.7 1.05 1.4 2.1
Rated Current Amps 3 6.3 9 11.5 18
Rated Power W 110 220 330 440 660
Peak Torque N.m 1.05 2.1 3.15 4.2 6.3
Peak Current Amps 9 19 27 35 54
Back E.M.F V/Krpm 13.7 13 13.5 13.7 13.5
Torque Constant N.m/A 0.13 0.12 0.13 0.13 0.13
Rotor Inertia g.cm2 400 800 1200 1600 2400
Body Length mm 71 84.5 98 111.5 138.5
Weight Kg 1.5 1.9 2.3 2.7 4
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or below (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude 1000 CHINAMFG or less

110mm 310V Brushless Motor Parameters:

Specification Unit Model
JK110BLS050 JK110BLS75 JK110BLS100 JK110BLS125
Number Of Phase Phase 3
Number Of Poles Poles 8
Rated Voltage VDC 310
Rated Speed Rpm 3400
Rated Torque N.m 2.38 3.3 5 6.6
Rated Current Amps 0.5 0.6 0.8 1
Rated Power KW 0.75 1.03 1.57 2.07
Back E.M.F V/Krpm 91.1 91.1 91.1 88.6
Torque Constant N.m/A 0.87 0.87 0.87 0.845
Body Length mm 130 155 180 205
Sensor Honeywell
Insulation Class H

Stepping Motor Customized

 

Detailed Photos

                                       Cnc Motor Kits                                                                                                   Brushless dc Motor with Brake

            Brushless Dc Motor with Planetary Gearbox                                                Bldc Motor with Encoder

 

                  Brushless Dc Motor                                                    Brushed Dc Motor                                                     Hybrid Stepper Motor

Company Profile

HangZhou CHINAMFG Co., Ltd was a high technology industry zone in HangZhou, china. Our products used in many kinds of machines, such as 3d printer CNC machine, medical equipment, weaving printing equipments and so on.
JKONGMOTOR warmly welcome ‘OEM’ & ‘ODM’ cooperations and other companies to establish long-term cooperation with us.
Company spirit of sincere and good reputation, won the recognition and support of the broad masses of customers, at the same time with the domestic and foreign suppliers close community of interests, the company entered the stage of stage of benign development, laying a CHINAMFG foundation for the strategic goal of realizing only really the sustainable development of the company.

Equipments Show:
Production Flow:
Package:
Certification:

1. who are we?

We are based in ZheJiang , China, start from 2011,sell to Domestic Market(26.00%),Western Europe(20.00%),North
America(20.00%),Northern Europe(10.00%),Eastern Europe(7.00%),Africa(5.00%),Southeast Asia(5.00%),Mid East(5.00%),South America(2.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?

We are based in ZheJiang , China, start from 2011,sell to Domestic Market(26.00%),Western Europe(20.00%),North
America(20.00%),Northern Europe(10.00%),Eastern Europe(7.00%),Africa(5.00%),Southeast Asia(5.00%),Mid East(5.00%),South America(2.00%). There are total about 51-100 people in our office.

3.what can you buy from us?

Always a pre-production sample before mass production;
Always final Inspection before shipment;

4. why should you buy from us not from other suppliers?

Professional one-to-1 motor customized . The world’s large enterprise of choice for high quality suppliers . ISO9001:2008 quality management system certification, through the CE, ROHS certification.

5. what services can we provide?

Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,FCA,CPT,DDP,DDU,Express Delivery,DAF,DES;
Accepted Payment Currency:USD,EUR,CAD,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: High Speed
Excitation Mode: Compound
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Order Sample

need to confirm the cost with seller
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

brushless motor

What factors should be considered when selecting a brushless motor for a specific application?

When selecting a brushless motor for a specific application, several factors need to be considered to ensure optimal performance and compatibility. Here are the key factors to take into account:

1. Power and Torque Requirements:

Determine the power and torque requirements of the application. This includes considering the desired operating speed, acceleration, and load characteristics. Select a brushless motor that can deliver the required power and torque output within the application’s operating range. Consider factors such as the motor’s power rating, torque density, and speed-torque characteristics.

2. Size and Form Factor:

Evaluate the space available for motor installation. Consider the physical dimensions and form factor of the motor to ensure it can fit within the application’s constraints. Additionally, consider the weight of the motor, especially in applications where weight is a critical factor, such as drones or portable devices.

3. Environmental Conditions:

Assess the environmental conditions in which the motor will operate. Consider factors such as temperature extremes, humidity, dust, and vibration levels. Choose a brushless motor that is designed to withstand and perform reliably in the specific environmental conditions of the application. Look for motors with appropriate protection ratings (e.g., IP ratings) and robust construction.

4. Efficiency and Energy Consumption:

Consider the desired energy efficiency of the application. Select a brushless motor with high efficiency to minimize energy consumption and maximize overall system efficiency. Efficiency can be influenced by factors such as motor design, winding configuration, and the use of advanced control techniques. Look for motors with high efficiency ratings or specific certifications, such as IE (International Efficiency) classifications.

5. Control and Feedback Requirements:

Evaluate the control and feedback requirements of the application. Determine if sensorless control or position feedback through sensors (e.g., encoders) is necessary for precise speed or position control. Consider the compatibility of the motor’s control interfaces and communication protocols with the application’s control system. Some applications may require motors with built-in control electronics or compatibility with specific motor controllers.

6. Operating Voltage and Power Supply:

Determine the available power supply and the operating voltage range of the application. Select a brushless motor that operates within the available voltage range and is compatible with the power supply infrastructure. Consider factors such as voltage ratings, current requirements, and the availability of appropriate power supply units or motor drives.

7. Expected Lifetime and Reliability:

Evaluate the expected lifetime and reliability requirements of the application. Consider factors such as the motor’s rated lifetime, bearing type, insulation class, and overall build quality. Look for motors from reputable manufacturers with a track record of producing reliable and durable products. Consider the availability of maintenance and support services.

8. Cost and Budget:

Consider the cost and budget limitations of the application. Balance the desired motor performance and features with the available budget. Compare the costs of different motor options, taking into account factors such as initial purchase cost, maintenance requirements, and potential energy savings over the motor’s lifetime.

9. Application-Specific Considerations:

Take into account any application-specific requirements or constraints. This may include factors such as regulatory compliance, specific certifications (e.g., safety or industry-specific certifications), compatibility with other system components, and any unique operational or functional requirements of the application.

By carefully considering these factors, you can select a brushless motor that is well-suited for the specific application, ensuring optimal performance, efficiency, reliability, and compatibility.

brushless motor

Are there different configurations of brushless motors, and how do they differ?

Yes, there are different configurations of brushless motors, each designed to meet specific application requirements and operating conditions. These configurations differ in terms of the arrangement of the motor components, such as the rotor, stator, and magnet configuration. Here’s a detailed explanation of the various configurations of brushless motors and how they differ:

  • Outrunner Configuration: In an outrunner configuration, the rotor is located on the outside of the stator. The rotor consists of a ring-shaped permanent magnet assembly with multiple magnetic poles, while the stator contains the motor windings. The outrunner configuration offers several advantages, including high torque output, robust construction, and efficient heat dissipation. Outrunner motors are commonly used in applications that require high torque and moderate speed, such as electric vehicles, robotics, and aircraft propulsion systems.
  • Inrunner Configuration: In an inrunner configuration, the rotor is located on the inside of the stator. The rotor typically consists of a solid cylindrical core with embedded permanent magnets, while the stator contains the motor windings. Inrunner motors are known for their compact size, high speed capabilities, and precise speed control. They are commonly used in applications that require high-speed rotation and compact form factors, such as drones, small appliances, and industrial automation equipment.
  • Internal Rotor Configuration: The internal rotor configuration, also known as an internal rotor motor (IRM), features a rotor located inside the stator. The rotor consists of a laminated core with embedded magnets, while the stator contains the motor windings. Internal rotor motors offer high power density, efficient heat dissipation, and excellent dynamic response. They are commonly used in applications that require high-performance and compact size, such as electric vehicles, industrial machinery, and robotics.
  • External Rotor Configuration: The external rotor configuration, also known as an external rotor motor (ERM), features a rotor located on the outside of the stator. The rotor consists of a magnet assembly with multiple magnetic poles, while the stator contains the motor windings. External rotor motors offer high torque density, compact size, and high starting torque capabilities. They are commonly used in applications that require high torque and compact design, such as cooling fans, HVAC systems, and small electric appliances.
  • Radial Flux Configuration: In a radial flux configuration, the magnetic flux flows radially from the center to the periphery of the motor. This configuration typically consists of a disc-shaped rotor with magnets on the periphery and a stator with motor windings arranged in a radial pattern. Radial flux motors offer high torque density, efficient heat dissipation, and good power output. They are commonly used in applications that require high torque and compact size, such as electric bicycles, electric scooters, and power tools.
  • Axial Flux Configuration: In an axial flux configuration, the magnetic flux flows axially along the length of the motor. This configuration typically consists of a pancake-shaped rotor with magnets on both faces and a stator with motor windings arranged in an axial pattern. Axial flux motors offer high power density, efficient cooling, and compact design. They are commonly used in applications that require high power output and limited axial space, such as electric vehicles, wind turbines, and aerospace systems.

In summary, different configurations of brushless motors include outrunner, inrunner, internal rotor, external rotor, radial flux, and axial flux configurations. These configurations differ in terms of the arrangement of motor components, such as the rotor and stator, and offer unique characteristics suited for specific applications. Understanding the differences between these configurations is essential for selecting the most suitable brushless motor for a given application.

brushless motor

In which industries are brushless motors commonly employed, and what are their key roles?

Brushless motors find applications in a wide range of industries, thanks to their numerous advantages and capabilities. Here are some of the industries where brushless motors are commonly employed and their key roles:

1. Automotive Industry:

In the automotive industry, brushless motors are used in electric vehicles (EVs) and hybrid electric vehicles (HEVs). They play a crucial role in providing propulsion for these vehicles, driving the wheels and ensuring efficient power delivery. Brushless motors offer high efficiency, precise control, and fast acceleration, making them ideal for electric drivetrains. Additionally, they are employed in various automotive subsystems such as electric power steering, HVAC systems, cooling fans, and braking systems.

2. Aerospace and Aviation:

Brushless motors have significant applications in the aerospace and aviation sectors. They are used in aircraft systems such as flight control surfaces, landing gear actuation, fuel pumps, and environmental control systems. Brushless motors provide reliable and precise motion control in critical aerospace applications, contributing to the safety and efficiency of aircraft operations. Their high power-to-weight ratio, compact size, and high-speed capabilities make them well-suited for aerospace requirements.

3. Robotics and Automation:

Brushless motors are extensively employed in robotics and automation systems. They power robotic arms, joints, and grippers, enabling accurate and controlled movements. Brushless motors offer high torque, precise position control, and rapid acceleration, making them vital for industrial robotics, collaborative robots (cobots), and automated manufacturing processes. Their compact size and efficiency also contribute to the design and performance of robotic systems.

4. Industrial Machinery and Equipment:

Brushless motors play a crucial role in various industrial machinery and equipment. They are used in machine tools, conveyors, pumps, compressors, and other industrial automation applications. Brushless motors provide reliable and efficient motion control, contributing to the productivity and performance of industrial processes. Their ability to handle high loads, operate at high speeds, and offer precise control makes them valuable in demanding industrial environments.

5. Medical and Healthcare:

In the medical and healthcare sector, brushless motors are employed in various medical devices and equipment. They are used in surgical tools, prosthetics, medical pumps, laboratory equipment, imaging systems, and more. Brushless motors offer quiet operation, precise control, and compact size, making them suitable for applications where accuracy, reliability, and patient comfort are critical.

6. Consumer Electronics:

Brushless motors are found in numerous consumer electronic devices. They power computer cooling fans, hard disk drives, drones, camera gimbals, electric toothbrushes, and other portable devices. Brushless motors in consumer electronics provide efficient and reliable operation while minimizing noise and vibration. Their small size, lightweight, and high-speed capabilities contribute to the design and functionality of modern consumer electronic products.

These are just a few examples of the industries where brushless motors are commonly employed. Their efficiency, reliability, precise control, compact size, and high-performance characteristics make them versatile and valuable in many other sectors as well. As technology continues to advance, brushless motors are likely to find new applications and play increasingly important roles in various industries.

China supplier Customized NEMA 23 BLDC DC Gear Geared Motor 24 48VDC Planetary Reduction Gearbox Integrated Driver Brushless DC Motor Power 10W Upto 800W   vacuum pump connector	China supplier Customized NEMA 23 BLDC DC Gear Geared Motor 24 48VDC Planetary Reduction Gearbox Integrated Driver Brushless DC Motor Power 10W Upto 800W   vacuum pump connector
editor by CX 2024-05-14

China wholesaler Low Noise 42mm Planetary Gearbox DC Brushed Gear Motor supplier

Product Description

low noise 42mm Planetary gearbox DC Brushed Gear motor
Please kindly let us know
1) what is your requirement to volt?
2) what is your requirement to rpm?
3) what is your requirement toTorque?
4) what is your requirement to Quantity.

Then we will provide solutions accordingly.

Product Category

China manufacturer gear motor price With Professional Technical Support

We always provide customers with distinctive products:cost-effective, lower
noise, higher efficiency and stability, longer life and higher strength.

Basic information
Product name PG42775126
 

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Constant Speed
Casing Protection: Closed Type
Structure and Working Principle: Brush
Certification: ISO/Ts16949/Ce/Rhos
Brand: Custom
Customization:
Available

|

Customized Request

Motor

How to Select a Gear Motor

A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

Angular geared motors

Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.

Planetary gearboxes

Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Motor

Hydraulic gear motors

Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Motor

Croise motors

There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

China wholesaler Low Noise 42mm Planetary Gearbox DC Brushed Gear Motor   supplier China wholesaler Low Noise 42mm Planetary Gearbox DC Brushed Gear Motor   supplier
editor by CX 2023-05-08

China NEMA 14 35mm High Torque Hybrid Stepper Stepping Motor with Planetary Gearbox supplier

Solution Description

Hybrid Stepper Planetary Gear Motor

Parameter:

HP351-1 35MM
Stepper Angel: 1.8

Drawing:

Motor Electrical Specification:
 

Sequence Model Phase Angle ( o ) L
(mm)
Rated Existing (A) Period
Resistance
(Ω)
Stage
Inductance  (mH)
Keeping Torque
(N.cm)
Detent Torque (N.cm) Guide
Wire
(NO.)
Motor
Weight
( g)
HP351-01205 one.8 28 .forty six 20 fourteen twelve .8 4 a hundred and twenty
HP351-01804 one.8 34 .42 25 32 eighteen 1. 4 160
Other Motor Electrical Specification make sure you refer to Hybrid Stepper Motor internet

 

Ratio three.71 five.18 fourteen 19 27 51 71 one hundred 139
Reducer Sequence 1 2 3
Size
( mm)
31. 38.5 48.two
Allowable Torque
(Kg.cm)
18 30 48
Instantaneous Torque
(Kg.cm)
54 90 144
Efficiency
(%)
90% 81% 73%
Excess weight
(g)
195 210 290

About Us:

We specialised in investigating, developing and servicing electric powered motors, gearbox and higher precision gears with the tiny modules.

Soon after many years of growth, we have an impartial product design and style and the R&D staff, provider crew, and expert quality handle group.

What is actually far more, we have 2 joint ventures. 1 is positioned in HangZhou, which generates hybrid stepper motor, cherished linear stepper motor, brushless DC motor, servo motor, stepper motor driver, brushless motor driver, encoder and brake.

Another 1 is located in HangZhou, which produces DC equipment motor. The manufacturing unit has dozens of CNC equipment and substantial precision examination equipment, implements the process administration and computerized procedure in most creating procedure.

We also have 2 cooperation factories. One particular is making AC reversible synchronous motor and AC servo motor, the other 1 is producing linear long lasting stepper motor, permanent stepper motors.

Customer’s Going to:

Associated Goods:

 

US $30
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Printing Equipment
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 4

###

Customization:

###

Series Model Step Angle ( o ) L
(mm)
Rated Current (A) Phase
Resistance
(Ω)
Phase
Inductance  (mH)
Holding Torque
(N.cm)
Detent Torque (N.cm) Lead
Wire
(NO.)
Motor
Weight
( g)
HP351-01205 1.8 28 0.46 20 14 12 0.8 4 120
HP351-01804 1.8 34 0.42 25 32 18 1.0 4 160
Other Motor Electrical Specification please refer to Hybrid Stepper Motor web

###

Ratio 3.71 5.18 14 19 27 51 71 100 139
Reducer Series 1 2 3
Length
( mm)
31.0 38.5 48.2
Allowable Torque
(Kg.cm)
18 30 48
Instantaneous Torque
(Kg.cm)
54 90 144
Efficiency
(%)
90% 81% 73%
Weight
(g)
195 210 290
US $30
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Printing Equipment
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 4

###

Customization:

###

Series Model Step Angle ( o ) L
(mm)
Rated Current (A) Phase
Resistance
(Ω)
Phase
Inductance  (mH)
Holding Torque
(N.cm)
Detent Torque (N.cm) Lead
Wire
(NO.)
Motor
Weight
( g)
HP351-01205 1.8 28 0.46 20 14 12 0.8 4 120
HP351-01804 1.8 34 0.42 25 32 18 1.0 4 160
Other Motor Electrical Specification please refer to Hybrid Stepper Motor web

###

Ratio 3.71 5.18 14 19 27 51 71 100 139
Reducer Series 1 2 3
Length
( mm)
31.0 38.5 48.2
Allowable Torque
(Kg.cm)
18 30 48
Instantaneous Torque
(Kg.cm)
54 90 144
Efficiency
(%)
90% 81% 73%
Weight
(g)
195 210 290

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Motor

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Motor

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Motor

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China NEMA 14 35mm High Torque Hybrid Stepper Stepping Motor with Planetary Gearbox     supplier China NEMA 14 35mm High Torque Hybrid Stepper Stepping Motor with Planetary Gearbox     supplier
editor by czh 2022-12-31

China supplier 24mm Custom 12v High Torque Long Life Low Speed Planetary Gearbox Tiny Gear Motor for sale ac motor

Warranty: 3months-1year
Design Quantity: 22JX5K/22ZY38B
Use: BOAT, Electrical Bicycle, Home Appliance
Variety: Gear MOTOR
Torque: .2nm-.7Nm
Building: Everlasting Magnet
Commutation: Brush
Shield Feature: Entirely Enclosed
Velocity(RPM): 4000r/min
Constant Existing(A): -1A
Performance: IE one
rated torque: .1Nm
Packaging Details: carton box by air, plywood circumstance by sea
Port: HangZhou

24JX5K-24ZY30 Everlasting Magnet DC Equipment Motor, Planetary Motor
-Motor variety :Brushed DC motor .-Gearbox Size:24mm Diameter-Voltage: 3~24V-Velocity:1~2000 RPM-Torque:.2~30kg.cm
Thorough Images 1.Extensively used in robotic, lock. Vehicle shutter, USB supporter, Slot machine, Money detector,Coin refund gadgets, Forex rely device, Towel dispensers,Automated doorways, High High quality Sturdy Making use of Unique Style WP Gearbox Worm WPX Pace Reducer Peritoneal equipment, Computerized Television rack,Office products, Household appliances, Automatic22mm OD planetary gearbox, permissible load assortment:.03N.m-.3N.mWe can provide the samples initial ,the MOQ is one hundred parts ,the delivery time is fifteen-20 days. Motor Specialized Data30JX30K/28ZY47P Long lasting Magnet DC Equipment Motor, Planetary MotorBasic parametersAlternative materials for annular equipment: MetalΦ30mmPermitted torque for 30JX30K/28ZY47P permanent magnet DC gear motor ranges from .2 N.m to 2.0N.m.

TypeRated voltage VDCNo-load pace r/minNo-load currentmARated pace r/minRated torque mN.mOutput powerWRated currentmAStall torquemN.mStall currentA
24ZY38B-12451245006036002.five0.nine17012.50.5
24ZY38B-126012600070480031.5240151.
22ZY38-126012V6000rpm80mA5150rpm3mN.m1.6W195mA19.5mN.m1.1A
Gear Motor Specialized DataSemi-Automatic PET Bottle Blowing Equipment Bottle Producing Device Bottle Moulding MachinePET Bottle Generating Machine is ideal for producing PET plastic containers and bottles in all shapes. Our Firm WorkshopStamping Equipment, CNC-Equipment, Vacuum Pressure Impregnating, Plating Equipment. and so on.
Why Pick Us WHY Decide on JIRUNA.Certificates handed:CE, ROSH, UL, CSA, ROSH checks passed for most of our motors and can supply reports.
B.Quick comments for customers:24 hrs reply for all customers’ inquiries. C. Competitive prices. D. Top quality guarantee:We have delivered significantly motors to Italy, Spain, and other European and Usa consumers with large good quality.E. Quick and Timely supply:Generally ten-fifteen days for items generation.F. Skilled Complex assist and Right after-sale support.G.Customized support for variety of motor in accordance to your requirement.
Packing & Supply THE SAMPLE BY Specific OR AIR
LCL=Less THAN CONTAINER LOAD, FCL=Full CONTAINER LOAD, BY Shipment
FAQ Q1: Are you a trading organization or a maker?A1: We are a maker.
Q2: Is there a MOQ for your motors?A2: 1pc for sample get, and 100pcs for bulk buy.
Q3: Do you have motors in stock?A3: Some typical prodcuts we have stock
Q4: Can I ask you for help if I know nothing about motor?A4: Of course, our pleasure, We are good individuals with large hearts.
Q5: Can we kind our brand name on it? A5: Of course, of program.
Q6: Where is your loading port ?
A6: HangZhou Port, ZheJiang Port, China.
Q7: What is your generation capability?A7: About 80000 PCS for every yr

The Benefits of Using a Gear Motor

A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.

Electric motor

The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Motor

Gear reducer

A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor

Motor shaft

Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
Motor

First stage gears

The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.

China supplier 24mm Custom 12v High Torque Long Life Low Speed Planetary Gearbox Tiny Gear Motor for sale     ac motor

China high quality CZPT 12V 24V 12 24 Volt 20W BLDC Brushless Planetary Gearbox DC Gear Geared Motors near me supplier

Merchandise Description

 

 

Solution Parameters

Model:  ZWBMD571571-168

  • Rated Voltage: 3.0V
  • No Load Speed: 98 rpm
  • No Load Current: 80mA
  • Rated Load Speed: 86 rpm
  • Rated Load Current: 220mA
  • Rated Load Torque: 106 gf.cm
  • Rated Torque of Equipment Box: 2,000 gf.cm
  • Immediate Torque of Equipment Box: 6,000 gf.cm
  • Total Length L: 34 mm
  • Gear Box Length L1: 19 mm
Model Application Parameters Rated Torque of Gear Box Instant Torque of Gear Box Gear Ratio Gear Box Size
L1
Rated At No Load At Rated Load Overall Length
L
Voltage Speed Recent Pace Recent Torque
VDC rpm mA rpm mA gf.cm mN.m mm gf.cm gf.cm mm
ZWBMD571571-forty six three. 375 eighty 315 215 39 three.8 30.9 2000 6000 46 15.9
ZWBMD571571-69 3. 250 80 210 215 58 5.seven 2000 6000 69
ZWBMD571571-102 three. 169 80 142 215 86 8.4 2000 6000 102
ZWBMD571571-151 3. 114 80 96 215 127 twelve.5 2000 6000 151
ZWBMD571571-168 three. 98 eighty 86 220 106 10.four 34 2000 6000 168 19
ZWBMD571571-249 3. 66 80 fifty eight 220 158 15 2000 6000 249
ZWBMD571571-368 three. forty five 80 39 220 233 23 2000 6000 368
ZWBMD571571-546 three. thirty 80 27 220 346 34 2000 6000 546
ZWBMD571571-809 three. twenty eighty eighteen 220 512 50 2000 6000 809

previously mentioned technical specs just for reference and customizable according to specifications.

Remember to let us know your needs and we will supply you with CZPT transmission options.

Comprehensive Photographs

 

 

Software

Intelligent wearable devices   watch,VR,AR,XR and and so on.
Household software kitchen area appliances, stitching machines, corn popper, vacuum cleaner, garden tool, sanitary ware, window curtain, clever closestool, sweeping robot, energy seat, standing desk, electric sofa, Tv set, laptop, treadmill, spyhole, cooker hood, electrical drawer, electric powered mosquito internet, clever cupboard, smart wardrobe, automated soap dispenser, UV child bottle sterilizer, lifting very hot pot cookware, dishwasher, washing device, foodstuff breaking machine, dryer, air conditioning, dustbin, coffee machine, whisk,intelligent lock,bread maker,Window cleansing robotic and etc.
communication gear 5G foundation station,movie meeting,cell cellphone and and so on.
Business office automation equipments   scanners, printers, multifunction machines copy machines, fax (FAX paper cutter), computer peripheral, lender device,  screen, lifting socket,  screen,notebook Computer and and so forth.
Automotive products  conditioning damper actuator, automobile DVD,door lock actuator, retractable rearview mirror, meters, optic axis handle device, head light beam degree adjuster, vehicle h2o pump, vehicle antenna, lumbar help, EPB, vehicle tail gate electrical putter, HUD, head-up screen, car sunroof, EPS, AGS, auto window, head restraint, E-booster, auto seat, motor vehicle charging station and and many others.
Toys and models  radio control design, automated cruise handle, journey-on toy, instructional robot, programming robot, medical robot, automated feeder, clever creating blocks, escort robotic and and so forth.
Medical equipments  blood strain meter, breath device, medical cleansing pump, healthcare bed, blood force screens, healthcare ventilator, surgical staplers, infusion pump, dental instrument, self-clotting cutter, wound cleaning pump for orthopedic surgery,digital cigarette, eyebrow pencil,fascia gun, , surgical robot,laboratory automation and etc.
Industrials   flow handle valves, seismic testing,automated reclosing,Agricultural unmanned aerial vehicle,computerized feeder ,intelligent convey cabinet and and so forth.
Electrical power tools  electric drill, screwdriver,garden device and etc.
Precision instruments  optics devices,computerized vending device, wire-stripping equipment and and so on.
Individual care tooth brush, hair clipper, electrical shaver, massager, vibrator, hair dryer, rubdown machine, scissor hair device, foot grinder,anti-myopia pen, facial attractiveness equipment, hair curler,Electric powered threading knife,Electrical power Best PORE, Puff machine,eyebrow tweezers and etc.
Client electronics digicam, cellular cellphone,electronic digicam, automatic retracting system,camcorder,  kinescope DVD,headphone stereo, cassette tape recorder, bluetooth earbud charging case, turntable, pill,UAV(unmanned aerial motor vehicle),surveillance digicam,PTZ digicam, CZPT intelligent speaker and and so forth.
robots academic robotic, programming robotic, medical robot, escort robotic and and many others.

 

Business Profile

HangZhou CZPT Equipment & Electronics Co., Ltd was set up in 2001,We supply the whole travel remedy for consumers from layout, tooling fabrication, parts producing and assembly. 

Workshop


Testing Equipment

1) Aggressive Positive aspects

  • 1) Competitive Positive aspects
    19+yr expertise in producing motor gearbox
    We give specialized support from r&d, prototype, screening, assembly and serial creation , ODM &OEM
    Aggressive Price tag
    Product Performance: Reduced sound, Large performance, Lengthy lifespan
    Prompt Delivery: fifteen doing work times after payment
    Tiny Orders Recognized

 2) Principal Items

  • Precision reduction gearbox and its diameter:3.4mm-38mm,voltage:1.5-24V,electrical power: .01-40W,output speed:5-2000rpm and output torque:1. gf.cm -50kgf.cm,

  • Custom-made worm and gear transmission equipment
  • Precise electromechanical movement module
  • Precise element and assembly of plastic and metal powder injection.

 

Our Companies

  • ODM & OEM
  • Gearbox layout and growth
  • Associated technological innovation assistance
  • Micro generate gearbox personalized remedy

Packaging & Shipping

one) Packing Specifics

packed in nylon first of all, then carton, and then bolstered with wooden case for outer packing.
Or according to client’s need.

two) Transport Details

samples will be shipped inside ten days
batch buy major time in accordance to the real predicament.

 

Certifications

Certifications

We Have passed to maintain ISO9001:2015(CN11/3571),ISO14001:2004(U006616E0153R3M), ISO13485:2016(CN18/42018) and IATF16949:2016(CN11/3571.01).

and far more…

 

FAQ

FAQ

one. Can you make the gearbox with personalized specs?
Indeed. We have layout and growth group, also a wonderful term of engineers, every single of them have
several function many years experience.

two.Do you give the samples?
Yes. Our firm can supply the samples to you, and the delivery time is about 5-15days according to the specification of gearbox you need.

three.What is your MOQ?
Our MOQ is 2000pcs. But at the commencing of our company, we accept modest purchase.

4. Do you have the product in inventory?
I am sorry we donot have the merchandise in inventory, All merchandise are created with orders.

5. Do you provide engineering assistance?
Of course. Our organization have design and advancement team, we can supply technologies assist if you
want.

six.How to ship to us?
We will ship the merchandise to you according to the DHL or UPS or FEDEX and so forth account you give. 

7.How to spend the money?
We accept T/T in advance. Also we have different bank account for obtaining money, like US dollors or RMB and so on.

8. How can I know the item is ideal for me?
Frist, you need to offer us the much more information details about the item. We will recommend the item to you in accordance to your requirement of specification. After you validate, we will get ready the samples to you. also we will offer some very good improvements according to your item use.

nine. Can I appear to your business to go to?
Indeed, you can arrive to our organization to check out at at any time, and welcome to check out our firm.

10. How do contact us ?
 Please send an inquiry

An AC motor is a kind of motor that utilizes the phenomenon of electromagnetic induction. AC electricity drives the motor. It is a current that periodically reverses course and changes its magnitude of the existing above time. This present is the reverse of a direct present or “DC” which flows in only 1 direction. AC motors can supply a relatively successful way to create mechanical vitality from a simple electrical enter sign.
These NEMA c-airplane reducers are gear toughness, upkeep-free of charge, and can be installed in any orientation with a slip match “O” ring style. Available in reduced to high reduction ratios, flange mount or base mount types, right angle or hollow shaft right angle variations. Put in NEMA C-Confront AC motors, brushless DC motors, and brushed DC motors. For 1/2 HP to 3 HP Motors NEMA 56C, 140TC, and 180TC Input Flange Inline Helical Equipment Reducers Correct Angle Hypoid Equipment Reducers

China high quality CZPT 12V 24V 12 24 Volt 20W BLDC Brushless Planetary Gearbox DC Gear Geared Motors     near me supplier

China supplier 49mm Low Noise Plastic Gearbox CZPT DC Worm Motor near me manufacturer

Item Description

49mm low sound plastic gearbox CZPT dc worm motor 

1.Item Description

49mm diameter higher quality12V/ 24V DC worm equipment motor 

one.dimension:Diameter 49mm 
2.daily life time:5000 hours 
three.content:copper or plastic

49mm diameter higher high quality 12V 24V DC WORM Equipment MOTOR

Application:

 welding machine, electrical household, CZPT machinery, workplace intelligent gear, hotel leisure, antomated device and so on.

Motor Voltage: DC12V, 24V,42V,48V,90V,110V ,300V

Motor Rated Power:15W, 25W,30W,45W,65W, 95W,120W,50W,180W

Motor no-load Speed:15RPM, 30RPM,60RPM,80RM,120RPM,150RPM,180RPM,200RPM,220RPM.

Product

VOTAGE

(V)

Power

(W)

 NO-LOAD Velocity

(RPM)

NO-LOAD Current

(A)

LOAD Pace

(RPM)

LOAD Present

(A)

LOAD TORQUE

(N.M)

RATIO

MOTOR Duration

(MM)

49ZYT

24

twenty five

180±5

≤0.8

150±5 

 ≤3.

 ≤3.5

 1:28

 71

49ZYT

24

25

150±5

≤ 0.8

 130±5

 ≤3.

 ≤3.5

 1:28

 71

49ZYT

24

15

90±5

≤ 0.eight

 80±5

 ≤3.

 ≤5.

 1:fifty six

 56

49ZYT

24

fifteen

65±5

≤ 0.eight

 60±3

 ≤3.

 ≤5.

 1:56

fifty six

49ZYT

12

twenty

70±3

≤ 1.two

 65±3

 ≤3.5

 ≤6.

 1:fifty six

 71

49ZYT

12

20

65±3

≤ 1.two

55±3

 ≤3.five

 ≤6.

 1:fifty six

 71

49ZYT

48

15

35±3

≤ 1.2

30±3

 ≤4.

 ≤7.

 1:70

fifty six

49ZYT

forty two

15

35±3

≤ 1.2

30±3

 ≤4.

 ≤7.

 1:70

 56

 Remarks: We also manufactue goods in accordance to customer’s needs.

2.Manufacturing Flow

3.Company Information

 In recent 10 a long time, Derry has been committed to the manufacture of the motor items and the main merchandise can be categorized into the subsequent collection, particularly DC motor, DC gear motor, AC motor, AC equipment motor, Stepper motor, Stepper equipment motor, Servo motor and Linear actuator sequence. 

Our motor merchandise are broadly used in the fields of aerospace industry, automotive business, fiscal products, family appliance, industrial automation and robotics, health-related tools, place of work products, packing machinery and transmission business, giving clients reputable tailored options for driving and managing.

4.Our Solutions

one). General Provider:

Quick Reply

All enquiry or electronic mail be replied in 12 hrs, no delay for your organization.

Professional Crew

Inquiries about merchandise will be replied skillfully, just, very best tips to you.

Brief Direct time

Sample or little purchase sent in 7-15 days, bulk or customized get about thirty times.

Payment Decision

T/T, Western Union,, L/C, and so on, easy for your business.

Ahead of shipment

Take images, send out to customers for affirmation. Only confirmed, can be transported out.

Language Decision

In addition to English, you can use your personal language by electronic mail, then we can translate it.

 

2). Customization Service:

Motor specification(no-load velocity , voltage, torque , diameter, sounds, life, screening) and shaft size can be tailor-manufactured according to customer’s requirements.

five.Package & Shipping

 
 

Induction motors, also recognized as asynchronous motors, use the electromagnetic induction generated by the magnetic field of the stator to create existing in the rotor, therefore making torque. These motors do not operate at a pace in sync with the existing, therefore the identify. They use the phenomenon of electromagnetic induction to change electrical strength into mechanical power. Induction motor rotors are the most typical type of AC motor located in pumps, compressors, and other machines of all kinds.
The rotor of a reluctance motor consists of a reliable solid metal component with a convex toothed rack. Their starting process is similar to an induction motor, but it operates like a synchronous motor. Usually, their rotors have much less poles than stators, which minimizes torque ripple and helps prevent best pole alignment, as no torque is produced in that place. Reluctance motors range in electrical power ratings from a number of watts to about 22 kilowatts.

China supplier 49mm Low Noise Plastic Gearbox CZPT DC Worm Motor     near me manufacturer

China supplier 63rbl Brushless DC Motors Power 30W-300W, Customized Performance, Option with Worm/Planetary Gearbox Controller Brake and Encoder, to Replace Dunker Motors near me factory

Product Description

63RBL Series 63mm Brushless Dc Motor
Standard specification

Merchandise Specification
Winding kind Star
Hall result angle 120° (electrical angle)
Shaft operate out .571mm
Radial play .05mm@450g
Conclude perform .05mm@450g
Max. radial force 150N@10mm from the flange
Max. axial force 60N
Insulation class Course B
Dielectric Toughness 500VDC for 1 moment
Insulation resistance 100MΩMin.500VDC

 Electric relationship

Lead No. Lead Coloration Lead Gauge Perform DESCRIPTION
1 Red UL1007/26AWG VCC Source VOLTAGE FOR Hall SENSORS
two Black GND Floor FOR Hall SENSORS
three Yellow Hall A  
four Inexperienced Hall B  
5 Blue Hall C  
6 Yellow UL1007/14AWG Section U  
7 Eco-friendly  PHASE V  
eight Blue  PHASE W  

Technique Specification
 

Design 63RBL-50 63RBL-sixty 63RBL-70 63RBL-eighty 63RBL-90 63RBL-a hundred 63RBL-110
Number of section three
Number of pole 4 (Option 8)
Voltage V  24v (Alternative for 12v up to 230vdc)
No load velocity rpm 4000 4000 4000 4000 4000 4000 4000
No load existing A .five .6 .7 .eight .nine 1. one.1
Rated torque Nm .two .threeone .4  .5 .6 .7  .eight 
Rated Speed rpm 3050 3050 3050 3000 3000 3000 3000  
Rated Current A  three.five 5.5    7. 8.5 one.5 twelve  fourteen
Rated Electrical power W six4 one00  twelveeight 157 188 219  251 
Excess weight Kg  .eighty 1.  1.two   one.4   1.6 one.eight  2. 
Length mm  fifty  60  70  80  ninety one hundred  a hundred and ten 

Dimensions

 

63WG.63RBL Series BRUSHLESS DC WORM Gear MOTOR

Motor Primary Specifications:
Bearing: High Top quality Ball Bearing
IP54   Protection Class: IP54  
 40ºC~+140ºC  Insulation Course: Class F / Doing work Temperature: -40ºC~+140ºC
Certifications: CE and ROHS
 Electric link:

Lead No. Direct Coloration Guide Gauge Purpose DESCRIPTION
one Pink UL1007/26AWG VCC Offer VOLTAGE FOR Corridor SENSORS
two Black GND Ground FOR Hall SENSORS
three Yellow Corridor A  
four Inexperienced Hall B  
5 Blue Corridor C  
six Yellow UL1007/14AWG Phase U  
seven Eco-friendly  PHASE V  
eight Blue  PHASE W  

Strategy Specification:

Model 63RBL-fifty 63RBL-sixty 63RBL-70 63RBL-80 63RBL-90 63RBL-one hundred 63RBL-one hundred ten
Variety of period 3
Quantity of pole 4 (Option eight)
Voltage V  24v (Option for 12v up to 230vdc)
No load speed rpm 4000 4000 4000 4000 4000 4000 4000
No load current A .five .6 .seven .eight .nine one. one.1
Rated torque Nm .2 .31 .four  .five .six .seven  .eight 
Rated Speed rpm 3050 3050 3050 3000 3000 3000 3000  
Rated Recent A  three.five 5.5    seven. 8.5 1.5 12  fourteen
Rated Electricity W 64 100  twelveeight 157 188 219  251 
Fat Kg  .eighty 1.  1.two   one.four   one.6 1.eight  two. 
Size mm  fifty  sixty  70  80  ninety a hundred  110 

63WG Series Worm Gearbox Technical specs: 

Reduction ratio   10 15 thirty
Efficiency   .65 .55 .forty five
Steady torque Ncm Up to a thousand(metallic gears,)                                                      
 Up to /four hundred(non-metallic gears,)             
 Fat of gearbox kg .four
Axial load/radial load N three hundred/350

Drawing:

 

 

Brushless DC Planetary Gear Motor 60JXE450K.63RBL Series

Motor Principal Technical specs:
Bearing: Large Quality Ball Bearing
IP54   Protection Class: IP54  
 Insulation Class: Class F / Doing work Temperature: -40ºC~+140ºC
Certifications: CE and ROHS

Electrical connection

Direct No. Guide Coloration Lead Gauge Purpose DESCRIPTION
one Pink UL1007/26AWG VCC Offer VOLTAGE FOR Corridor SENSORS
2 Black GND Ground FOR Hall SENSORS
3 Yellow Corridor A  
four Environmentally friendly Hall B  
five Blue Corridor C  
six Yellow UL1007/14AWG Stage U  
7 Environmentally friendly  PHASE V  
8 Blue  PHASE W  

Technique Specification

Product 63RBL-50 63RBL-sixty 63RBL-70 63RBL-80 63RBL-90 63RBL-one hundred 63RBL-110
Quantity of period 3
Number of pole 4 (Option 8)
Voltage V 24v (Option for 12v up to 230vdc)
No load velocity rpm 4000 4000 4000 4000 4000 4000 4000
No load existing A .5 .six .7 .eight .9 1. 1.1
Rated torque Nm .two .three1 .four  .five .six .7  .eight 
Rated Velocity rpm 3050 3050 3050 3000 3000 3000 3000  
Rated Recent A  3.five 5.five    7. eight.5 one.5 twelve  14
Rated Electrical power W sixfour one00  twelveeight 157 188 219  251 
Bodyweight Kg  .80 1.  1.2   one.four   1.6 1.eight  2. 
Duration mm  fifty  60  70  eighty  ninety one hundred  a hundred and ten 

Planetary Gearbox Technical specs:
Gearbox Design: 60JXE450K

Ring content E :Metal
Bearing at output Ball bearings
 Max. Radial load (10mm from flange) ≤400N
Max. shaft axial load ≤120N
Radial perform of shaft (around to flange) ≤0.08mm
Axial enjoy of shaft ≤0.4mm
Backlash at no-load) ≤1.5°
Shaft push suit force, max ≤300N

 

Reduction ratio Rated tolerance torque Max momentary tolerance torque Effectiveness L
(mm)
(g)
Excess weight(g)
one/3.6 1/4.twenty five 1/5.33 4 N.m twelve N.m 90% 40.3±0.5 520
1/thirteen 1/15 1/18 one/23 1/28 one8 N.m 36 N.m 81% 53.8±0.5 710
one/43 1/52 1/sixty one 1/seventy two 1/ninety six 1/121 36 N.m 72 N.m seventy three% sixty seven.2±0.5 900
one/154 1/187 1/220 1/260 1/307
one/409 1/514 1/645 1/809
forty five N.m 90N.m sixty six% 80.six±0.5 1100

Drawing:

Far more Brushless Motors

Polyphase motors can be either two-stage or 3-period motors. They perform like one-stage induction motors, but each one-phase and polyphase motors function on a rotating magnetic area. Their rotating magnetic fields are generated by two- or a few-phase currents passing through two or far more sets of coils. The rotating magnetic subject generates torque. Polyphase motors are utilized in purposes that demand higher electricity, this sort of as the power drive of compressors, hydraulic pumps, air conditioning compressors, and irrigation pumps.
AC motors differ from several other kinds of motors, specifically some of the more common DC (immediate current) motors, by many essential standards. The most simple of these is the truth that an AC motor relies fully on the alternating present all around its circuit to generate efficient mechanical power. We are going to discuss this unique method in a lot more depth in the subsequent sections of this guidebook.

China supplier 63rbl Brushless DC Motors Power 30W-300W, Customized Performance, Option with Worm/Planetary Gearbox Controller Brake and Encoder, to Replace Dunker Motors     near me factory

in Phoenix United States sales price shop near me near me shop factory supplier Gearbox with Double Output Shaft Gearbox for Pto Speed Increase Industrial Gearbox Types Type Transmissions Screw Jacks manufacturer best Cost Custom Cheap wholesaler

  in Phoenix United States  sales   price   shop   near me   near me shop   factory   supplier Gearbox with Double Output Shaft Gearbox for Pto Speed Increase Industrial Gearbox Types Type Transmissions Screw Jacks manufacturer   best   Cost   Custom   Cheap   wholesaler

Furthermore, WE CAN Produce Personalized VARIATORS, GEARED MOTORS, Electrical MOTORS AND OTHER HYDRAULIC Merchandise In accordance TO CUSTOMERS’ DRAWINGS. Our experts and engineers have 23 years of Encounter in the Bearing Sector. Every single method, every section, each and every purpose in EPG is demanded to be accomplished one step adhering to an additional, meticulously and cautiously, from materials choice, reformation to producing equipment, from parts warmth remedy to computerized assembly, from quality handle to item inspection and testing and from purchase dealing to soon after revenue services.

Low EPT NMRV series worm EPT employed marine EPT for sale,inexpensive worm EPT box costs for textile EPTs

Product Description

NMRV Used Marine EPT

1. Mad of higher-good quality EPT alloy,ligEPT weigEPT and non-rusting

2. Big output torque

three. Smooth in operating and lower in sounds,can function EPT time in dreadful situations.

four. Large in radiating effectiveness.

5. Great-hunting in visual appeal,resilient in services life and tiny in volume.

6. Ideal for omnibearing set up.

Design No.: NMRV571, NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150
Ratio: five,seven.five,ten,fifteen,twenty,25,30,forty,fifty,60,80,a hundred
Colour: Blue(Ral5571)/Silver Grey (RAL9006) Or On Consumer Ask for
EPT: EPT: Dimension 25-one hundred ten Is EPT Alloy, Size a hundred and ten-a hundred and fifty Is Solid-Iron
Worm Wheel: ZCuSn10Pb1
Worm:20Cr
Pinion:Tin Bronze
Output Shaft: Steel-45#
Usages: EPT EPT: Meals Things, Ceramics, Chemical, EPT, Dyeing,EPT functioning, Glass.
IEC Flange: IEC StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd Flange Or On Client Ask for

Company Info

EPT handle

EPT

EPT Specifics: StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd carton/Pallet/StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd picket case

Shipping Specifics : fifteen-30 working daEPTupon payment

Our Certifications

Relevant Merchandise

EPT Planetary EPT

EPT Planetary EPT Robotic RV EPT velocity EPT
Custom made created Non-stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd EPT UDL Sequence Variator
PYZ Sequence Helical Tooth Shaft Mounted EPT 8000 Collection Cycloidal EPT
SLT Series Spiral EPTl EPT SLSWL Sequence Worm Screw Jack
SLP Series Planetary EPT SLH/SLB Collection High EPT EPT
NMRV Sequence Worm EPT BKM Sequence Helical-hypoid EPT
SLRC Collection Helical EPT SLSMR Series Shaft Mounted EPT
SLXG Sequence Shaft Mounted EPT X/B Collection Cycloidal EPT
SLR/SEPT/SLK/SLS Collection Helical EPT AC/DC EPT

FAQ

one.Payment Time period: TT, L/C

two.Shipping and delivery time: about thirty daEPTfrom EPT payment.

3.We accept custom-made goods as for each your EPT requirement.

4.XiHu (West Lake) Dis.hu (West Lake) Dis.strains for the Choice:Generally we can select one particular EPT which is ideal for you with some informations from you,this sort of as ratio/motor speed/mounting dimension/ out torque and so on.

five.If the minimal orEPTamount is in extra of $10000, there are preferential.

Q1: What info should I notify you to affirm the item?

A:Model/Dimension, EPT Ratio, Shaft instructions amp OrEPTquantity.

Q2: What can i do if I will not know which one EPT?

A:Dont worry, Send as a lot data as you can, our team will help you discover the rigEPT a single you are searching for.

Q3: What is your merchandise warranty interval?

A:We offer a single yr guarantee considering that the vessel departure day left EPT.

Q4: Are you buying and selling business or company ?

A: We are factory.

Q5: How EPT is your delivery time?

A: EPTly it is 5-10 daEPTif the merchandise are in inventory. or it is fifteen-20 daEPTif the items are not in stock, it is in accordance to quantity.

Q6: Do you offer samples ? is it totally free or extra ?

A: Indeed, we could offer you the sample for free of charge charge but do not spend the EPT of freight.

Q7: What is your terms of payment ?

A: Payment lt=1000USD, a hundred% EPT. Payment gt=1000USD, 30% T/T EPT ,harmony just before shippment.

If you have one more question, pls feel totally free to get in touch with us as below:

Speak to Us

  in Phoenix United States  sales   price   shop   near me   near me shop   factory   supplier Gearbox with Double Output Shaft Gearbox for Pto Speed Increase Industrial Gearbox Types Type Transmissions Screw Jacks manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Phoenix United States  sales   price   shop   near me   near me shop   factory   supplier Gearbox with Double Output Shaft Gearbox for Pto Speed Increase Industrial Gearbox Types Type Transmissions Screw Jacks manufacturer   best   Cost   Custom   Cheap   wholesaler

in Frankfurt Germany sales price shop near me near me shop factory supplier RV Worm Gear Motor Gearbox with Output Flange Mounted manufacturer best Cost Custom Cheap wholesaler

  in Frankfurt Germany  sales   price   shop   near me   near me shop   factory   supplier RV Worm Gear Motor Gearbox with Output Flange Mounted manufacturer   best   Cost   Custom   Cheap   wholesaler

PersonnelOur product sales individuals are effectively trained to accommodate your requests and talk English for your convenience. Furthermore, WE CAN Make Customized VARIATORS, GEARED MOTORS, Electrical MOTORS AND OTHER HYDRAULIC Products According TO CUSTOMERS’ DRAWINGS. EPG is a professional company and exporter that is worried with the layout, improvement and manufacturing. Merchandise INTRODUCTION:
Primary Characteristics:
1) Made of higher quality EPT alloy, ligEPT weigEPT and non-rusting
2) Big output torque and substantial radiating efficiency three) Smooth running and reduced noise, can function EPT time in dreadful situation
4) Very good-searching physical appearance, sturdy support lifestyle and tiny volume
5) Suited for omnibearing installation
Primary Materials:
1)housing: aluminium alloy ADC12(dimensions 571-090) die cast iron EPT200(dimension a hundred and ten-a hundred and fifty)
2)Worm:20Cr, ZI Involute profile carbonize ampquencher heat remedy make EPT floor hardness up to fifty six-62 HRC After precision grinding, carburization layer’s thickness in between .three-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1

Item PARAMETERS:

Dimension Specification EPT ratio
IEC N M P seven.5 ten fifteen twenty twenty five 30 forty 50 sixty eighty 100
D
25 56B14 50 65 80 nine 9 nine 9 9 nine nine nine 9
30 63B5 95 one hundred fifteen a hundred and forty 11 eleven eleven 11 eleven eleven eleven eleven
63B14 60 seventy five 90
56B5 eighty one hundred a hundred and twenty nine nine 9 9 nine nine nine 9 9 nine
56B14 fifty sixty five eighty nine 9 9 9 9 9 nine 9 9 nine
40 71B5 a hundred and ten a hundred thirty a hundred and sixty fourteen 14 14 14 fourteen 14 fourteen fourteen
71B14 70 eighty five a hundred and five
63B5 ninety five a hundred and fifteen 140 11 11 11 11 eleven eleven eleven eleven 11 11 eleven
63B14 60 75 90
56B5 eighty 100 120 nine nine 9 9
fifty 80B5 a hundred thirty one hundred sixty five two hundred 19 19 19 19 19 19 19
80B14 80 one hundred a hundred and twenty
71B5 a hundred and ten a hundred thirty 160 fourteen 14 fourteen 14 fourteen 14 14 fourteen fourteen fourteen
71B14 70 85 a hundred and five
63B5 ninety five one hundred fifteen one hundred forty 11 11 eleven 11
sixty three 90B5 one hundred thirty 165 200 24 24 24 24 24 24 24
90B14 ninety five 115 one hundred forty
80B5 130 165 200 19 19 19 19 19 19 19 19 19 19
80B14 eighty a hundred 120
71B5 one hundred ten one hundred thirty one hundred sixty fourteen 14 14 14 fourteen
71B14 70 85 one hundred and five
75 a hundred/112B5 a hundred and eighty 215 250 28 28 28
one hundred/112B14 110 one hundred thirty one hundred sixty
90B5 one hundred thirty a hundred sixty five two hundred 24 24 24 24 24 24 24
90B14 95 one hundred fifteen 140
80B5 130 one hundred sixty five two hundred 19 19 19 19 19 19 19 19
80B14 eighty a hundred a hundred and twenty
71B5 a hundred and ten 130 160 fourteen 14 fourteen fourteen
90 one hundred/112B5 180 215 250 28 28 28 28 28 28
one hundred/112B14 a hundred and ten a hundred thirty 160
90B5 130 one hundred sixty five two hundred 24 24 24 24 24 24 24 24 24
90B14 95 115 one hundred forty
80B5 a hundred thirty one hundred sixty five 200 19 19 19 19 19
80B14 80 a hundred one hundred twenty
a hundred and ten 132B5 230 265 300 38 38 38 38
100/112B5 a hundred and eighty 215 250 28 28 28 28 28 28 28 28 28
one hundred/112B14 110 one hundred thirty a hundred and sixty
90B5 130 a hundred sixty five 200 24 24 24 24 24 24 24
80B5 130 165 two hundred 19 19
one hundred thirty 132B5 230 265 three hundred 38 38 38 38 38 38 38
one hundred/112B5 180 215 250 28 28 28 28 28 28 28
a hundred/112B14 a hundred and ten one hundred thirty a hundred and sixty
90B5 one hundred thirty a hundred sixty five two hundred 24 24
one hundred fifty 160B5 250 300 350 forty two 42 42 42 42
132B5 230 265 three hundred 38 38 38 38 38 38
a hundred/112B5 a hundred and eighty 215 250 28 28 28 28

Merchandise Define Proportions:

Business Quick INTRODUCTION:
We are a skilled EPT manufacturer situated in EPTizhou, EPT province.
Our leading goods is total range of RV571-a hundred and fifty worm EPTs , also provided hypoid helical EPT, Computer units, UDL Variators and AC EPTs.
EPT are broadly utilised for applications this kind of as: foodstuffs, EPT, EPT, chemical substances, pharmacy, plastics, paper-creating, design EPTry, metallurgic EPT, environmental protection engineering, and all varieties of automated lines, and assembly traces.
With rapidly supply, outstanding soon after-product sales support, EPT producing faXiHu (West Lake) Dis.Hu (West Lake) Dis.ty, our items sell well each at property and overseas. We have exported our EPTs to SouthEPT Asia, EPTern Europe and the Middle EPT and so on.Our intention is to deveXiHu (West Lake) Dis.Hu (West Lake) Dis. and innovate on the foundation of high quality, and EPT a excellent track record for EPTs.

WORKSHOP:

EXHIBITIONS:



FAQ:
1.Q:Can you make as per client drawing?
A: Indeed, we offer you custom-made services for clients accordingly. We can use customer’s nameplate for EPTes.
2.Q:What is your terms of payment ?
A: thirty% deposit before manufacturing,equilibrium T/T ahead of shipping.
3.Q:Are you a buying and selling firm or company?
A:We are a manufacurer with EPT equipment and knowledgeable personnel.
4.Q:What is actually your generation ability?
A:8000-9000 PCS/Thirty day period
4.Q:What is your MOQ?
A: one pcs
five.Q:Totally free sample is available or not?
A:Yes, we can provide free sample if buyer concur to shell out for the courier EPT
six.Q:Do you have any certificate?
A:Sure, we have CE certificate and SGS certificate report.
Speak to details:
Ms Lingel Pan

For any inquiries just really feel free ton speak to me. A lot of thanks for your variety interest to our organization!

  in Frankfurt Germany  sales   price   shop   near me   near me shop   factory   supplier RV Worm Gear Motor Gearbox with Output Flange Mounted manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Frankfurt Germany  sales   price   shop   near me   near me shop   factory   supplier RV Worm Gear Motor Gearbox with Output Flange Mounted manufacturer   best   Cost   Custom   Cheap   wholesaler

in Bali Indonesia sales price shop near me near me shop factory supplier Advance 120c Gearbox with CCS manufacturer best Cost Custom Cheap wholesaler

  in Bali Indonesia  sales   price   shop   near me   near me shop   factory   supplier Advance 120c Gearbox with CCS manufacturer   best   Cost   Custom   Cheap   wholesaler

Owing to our sincerity in providing best services to our customers, comprehension of your wants and overriding sense of obligation towards filling purchasing requirements, If you want any information or samples, please contact us and you will have our soon reply. In addition, WE CAN Create Custom-made VARIATORS, GEARED MOTORS, Electrical MOTORS AND OTHER HYDRAULIC Merchandise In accordance TO CUSTOMERS’ DRAWINGS.
Progress 120C LigEPT Large Speed Marine EPT for Boats

120C marine EPT possesses features of pace reduction, in advance and astern, clutching and de-clutching, and bearing propeller thrust. Featuring in compact in construction, little in volume and ligEPT in weight, it can match large-pace engine to kind ship EPT device.

120C marine EPT is ideal for tiny and medium boats such as yacht, traffic, passenger and cargo boats.

Enter speed 1000-2500r/min
Reduction ratio one.forty eight,1.ninety four,two.45 Trans. capacity .10kw/r/min
2.ninety six .09kw/r/min
three.35 .08kw/r/min
Handle way Push-and-pull fleXiHu (West Lake) Dis.ble shaft, EPTly
Rated thrust 25KN
CEPTr distance 180mm
L timesW timesH 432 times440 times650mm
Web weight 225kg
Flywheel 6135Ca,SAE14,11.five
Bell housing 6135Ca,SAE1,2,3

HCQ/HCA/HCM/HCV series ligEPT high-velocity maritime EPTes self-deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed by EPT are designed of EPT ranging 20kW~2300kW, ratio ranging one.5~3.five:one and full in technical specs. Merchandise with ‘Q’ in code is with cast iron housing, with ‘M’ EPT housing and with ‘A’ and ‘V’ with down angle EPT construction. These goods enEPT higher market share, are extensively used on different yacht, visitors boat, passenger boat. Product design and producing ability are in nationwide top and global EPT stage. Principal functions: 1. Possess functions of clutch amp de-clutching, speed reduction and bearing propeller thrust two. Compact in structure, tiny in volume and ligEPT in fat 3. Substantial rated input pace and high manufacturing precision 4. Great full-EPT functionality, low sounds and little vibration 5. Match large-pace diesel motor, mainly utilised on medium-to-little substantial-velocity boats six. Implement mechanical and computerized handle, noticing regional emergent manage and distant management of the EPT.

Advance HCD800 – three,429:one

MEDIUM/EPT Duty EPT

Reference variety A-HCD800-three,429
Model Advance
Model HCD800
Ratio three,429:one
EPT 1530 HP @ 1800 RPM
Max. EPT 1530 HP @ 1800 RPM
RPM Assortment one thousand-1800
Rated propeller thrust a hundred and ten kn
N/n ,85 hp/rpm

Functions amp Alternatives

Sae housing Without/sae-00
Controls EPT
Pto Not offered
Coupling dimensions 21 /18 inch
Coupling type EPT block EPT, with alu. ring

Proportions

Vertical offset 450 mm
LxWxH 1056x1280x1341 mm
Internet. weight 2200 kg

Offered Arrangements

Ratio 3,96:1 3,429:one 4,167:one four,391:one four,905:1 5,474:one five,889:1
Price ,eighty five hp/rpm ,eighty hp/rpm ,75 hp/rpm ,70 hp/rpm

Progress 135A – five,06:one

MEDIUM/EPT Obligation EPT

Reference variety A-135A-five,06
Model Progress
Product 135A
Ratio five,06:1
EPT 212,4 HP @ 1800 RPM
Max. EPT 236 HP @ 2000 RPM
RPM Selection a thousand-2000
Rated propeller thrust 29,4 kn
N/n ,118 hp/rpm

Features amp Possibilities

Sae housing Without/sae-1
Controls EPT/ EPT
Pto Not accessible
Coupling dimension 14 inch
Coupling sort EPT block EPT, with alu. ring

Proportions

Vertical offset 225 mm
LxWxH 578x744x830 mm
Internet. fat 470 kg

Obtainable Arrangements

Ratio 2,03:1 2,59:1 3,04:one 3,62:one four,eleven:1 four,65:one 5,06:1 5,47:1 5,81:1
Charge ,134 hp/rpm ,a hundred twenty five hp/rpm ,118 hp/rpm ,103 hp/rpm ,094 hp/rpm

Progress HCD600A – 5,44:1

MEDIUM/EPT Obligation EPT

Reference quantity A-HCD600A-5,44
Brand Advance
Design HCD600A
Ratio 5,forty four:one
EPT 972 HP @ 1800 RPM
Max. EPT 1134 HP @ 2100 RPM
RPM Selection a thousand-2100
Rated propeller thrust ninety kn
N/n ,fifty four hp/rpm

Features amp Possibilities

Sae housing Without/sae-00
Controls EPT
Pto Not available
Coupling dimension 21 /eighteen /14 inch
Coupling sort EPT block EPT, with alu. ring/(substantial) fleXiHu (West Lake) Dis.ble coupling

Dimensions

Vertical offset 415 mm
LxWxH 745x1094x1271 mm
Net. fat 1550 kg

Accessible Arrangements

Ratio 3,32:one 4,seven:1 four,18:one four,43:one five,44:1 5,71:one five:one
Charge ,sixty five hp/rpm ,62 hp/rpm ,fifty four hp/rpm ,6 hp/rpm

Advance HC400 – four,06:one

MEDIUM/EPT Responsibility EPT

Reference quantity A-HC400-4,06
Model Advance
Design HC400
Ratio 4,06:one
EPT 684 HP @ 1800 RPM
Max. EPT 684 HP @ 1800 RPM
RPM Range one thousand-1800
Rated propeller thrust 82 kn
N/n ,38 hp/rpm

Features amp Choices

Sae housing Without having/sae-/sae-one
Controls EPT/ EPT
Pto Not obtainable
Coupling size 18 /16 /14 inch
Coupling kind EPT block EPT, with alu. ring/(higher) fleXiHu (West Lake) Dis.ble coupling

Dimensions

Vertical offset 264 mm
LxWxH 843x950x890 mm
Net. excess weight 820 kg

Offered Arrangements

Ratio one,5:1 one,seventy seven:1 two,04:1 two,5:one 3,25:one 3,38:one three,42:one 3:one four,06:one four,sixty one:1 4,ninety four:1
Fee ,forty five hp/rpm ,38 hp/rpm ,25 hp/rpm

Progress D300A – 4:one

MEDIUM/EPT Responsibility EPT

Reference variety A-D300A-four
Brand Advance
Model D300A
Ratio 4:one
EPT 630 HP @ 1800 RPM
Max. EPT 805 HP @ 2300 RPM
RPM Variety a thousand-2300
Rated propeller thrust sixty kn
N/n ,35 hp/rpm

Functions amp Alternatives

Sae housing With out/sae-/sae-1
Controls EPT/ EPT
Pto Available
Observe If employing fleXiHu (West Lake) Dis.ble couping, price will rise 8%
Coupling dimensions eighteen /16 /14 inch
Coupling sort EPT block EPT, with alu. ring/(high) fleXiHu (West Lake) Dis.ble coupling

Dimensions

Vertical offset 355 mm
LxWxH 786x920x1040 mm
Web. weight 940 kg

Accessible Preparations

Ratio 4,forty eight:one four:one 5,05:1 5,52:1 5,nine:1 6,fifty six:1 7,06:one seven,63:one
Rate ,33 hp/rpm ,35 hp/rpm ,30 hp/rpm ,twenty five hp/rpm ,20 hp/rpm ,seventeen hp/rpm

Main Data

Enter speed a thousand-2500r/min
Reduction ratio four.00 Trans. ability .257kw/r/min
four.48 .243kw/r/min
five.05 .221kw/r/min
five.52,five.90 .184kw/r/min
six.fifty six,seven.06 .147kw/r/min
7.63 .125kw/r/min
Handle way Thrust-and-pull fleXiHu (West Lake) Dis.ble shaft, EPTly, pneumatically
Rated thrust 60KN
CEPTr distance 355mm
L timesW timesH 786 times980 times1041mm
Net fat 940kg
Flywheel 12V135,SAE18,16,14
Bell housing 12V135,SAE0,one

Our Support

Pre-EPT Provider

* Inquiry and consulting assist.
* Sample tests support.
* Check out our Manufacturing facility.

Right after-EPT Service

* Instruction how to instal the EPT, coaching how to use the EPT.
* Engineers obtainable to services EPTry overEPT.

product ratio Rate
(HP/rpm)
Engine
pace(rpm)
all round
dimension
L*W*H(mm)
Web
Weight
(kgs)
Maritime EPT 6 2.fifty two three.05 three.5 .0044 a thousand~2100 350 occasions 316 times 482 fifty eight
Maritime EPT 16A two.07 2.48 2.95 three.35 3.383 .012 1000~2000 422 moments 325 moments 563 84
Marine EPT MD571 one.fifty six 1.88 2.63 .009~.012 4000 281 occasions 230 moments 221 fifteen
Maritime EPT MA100 1.six two. 2.55 3.eleven three.59 three.88 .006~.009 1500~3000 236 times 390 occasions 420 seventy five
Marine EPT MA125 2.03 2.46 3.04 3.fifty seven four.05 4.39 four.7 .011~.02 1500~3000 291 times 454 instances 485 one hundred fifteen
Maritime EPT MA142 one.97 2.52 three.03 three.54 three.ninety five 4.five five.06 5.47 .013~.03 1500~2500 308 moments 520 instances a hundred and forty
Maritime EPT 40A 2.07 2.ninety six three.44 .571~.03 750~2000 414 times 610 occasions 620 225
Maritime EPT MB170 one.ninety seven two.52 three.03 three.fifty four 3.ninety six four.fifty 5.06 5.47 5.88 .571~.039 one thousand~2500 485 occasions 610 occasions 656 240
Maritime EPT HCU65 two.045 2.fifty 3.068 3.427 .045 a thousand~2200 504 instances 600 occasions 808 260
Maritime EPT HC65 one.53 two.03 2.fifty 2.ninety six .044~.048 1000~2500 311 occasions 460 occasions 544 a hundred thirty
Marine EPT 120B 2.03 2.81 three.seventy three .044~.088 750~1800 605 instances 744 instances 770 four hundred
Marine EPT 120C 1.48 1.94 2.forty five 2.96 three.35 .08~.1 a thousand~2500 352 times 694 occasions 650 225
Marine EPT MV100 1.23 1.62 2.07 2.fifty two 2.87 .08~.1 1500~3000 390 instances 630 occasions 580 220
Maritime EPT HCV120 1.509 2.016 two.524 .076~.01 1500~2500 502 occasions 600 instances 847 300
Marine EPT 135 two.03 2.59 three.04 3.62 4.eleven 4.sixty five five.06 five.forty seven five.eighty one .070~.10 one thousand~2000 578 times 744 times 830 470
Maritime EPT MB242 3.04 three.fifty two three.95 4.53 five.twelve five.fifty six 5.88 .074~.013 one thousand~2500 442 occasions 744 occasions 763 385
Maritime EPT HC138 2.52 three. three.57 4.05 4.forty five .eleven 1000~2500 520 occasions 792 occasions 760 360
Maritime EPT HC200 1.forty eight 2. two.28 .147 one thousand~2200 430 times 744 instances 708 280
Marine EPT MB270A 4.05 4.53 five.12 five.50 5.ninety five six.39 6.82 .088~.147 a thousand~2500 594 moments 810 occasions 868 675
Maritime EPT HCV230 1.485 one.956 two.483 .146~.184 a thousand~2200 568 instances 620 moments 1571 450
Maritime EPT HCQ300 1.06 one.forty six two.05 two.38 .235~.250 1000~2300 533 instances 681 instances 676 360
Maritime EPT three hundred 2.04 2.54 three. 3.53 4.one 4.61 4.94 five.44 .125~.257 one thousand~2300 638 moments 870 times 864 740
Marine EPT D300 four. four.48 5.05 five.fifty two five.ninety six.56 7.06 seven.sixty three .125~.257 one thousand~2300 638 moments 920 occasions 1040 880
Maritime EPT T300 six.03 six.sixty five seven.04 7.fifty four 8.02 .221~.243 a thousand~2300 640 moments 920 times 1110 1120
Marine EPT HCV400 one.388 2. .274~.thirty a thousand~1800 780 times 740 occasions 1192 650
Marine EPT HC400 2.04 2.50 3. three.forty two four.06 .279~.331 1000~1800 641 occasions 890 occasions 890 820
Marine EPT HCD400A 3.ninety six four.33 four.forty three 4.70 five. 5.53 5.89 .272~.331 one thousand~1800 641 instances 950 times 988 1100
Maritime EPT HCT400A 6.096 6.49 six.ninety three 7.forty two 7.ninety five 8.40 nine. nine.forty seven .243~.331 a thousand~2100 784 instances 992 moments 1130 1450
Maritime EPT HCT400A~one eight.fifteen eight.69 9.27 9.94 10.sixty 11.46 12 .262~.331 a thousand~2100 869 instances 1100 instances 1275 1500
Maritime EPT HC600A 2. two.forty eight 3. 3.58 three.89 .40~.48 1000~2100 745 instances 1094 moments 1126 1300
Maritime EPT HCD600A four.18 4.43 four.70 5. 5.forty four five.seventy one .forty~.48 one thousand~2100 745 times 1094 occasions 1271 1550
Marine EPT HCT600A 6.06 six.49 6.97 7.fifty one 8.04 8.66 nine.35 .28~.44 a thousand~2100 805 occasions 1094 moments 1271 1600
Marine EPT HCT600A~1 8.23 8.eighty two nine.47 10.8 11.sixty five 12.57 .331~.441 a thousand~2100 878 instances 1224 instances 1346 1700
Marine EPT 750B 1.forty nine one.ninety seven two.forty eight 2.ninety two .fifty five 600~1200 1117 instances 850 occasions 1170 1600
Marine EPT CEPT800 5.fifty seven 5.68 5.93 6.forty three 6.86 seven.33 7.84 .515~.625 800~1800 1056 moments 1280 moments 1425 2000
Maritime EPT 900 1.forty six two.04 two.47 3. three.sixty 4.08 4.sixty three four.95 .40~.66 600~1600 1115 instances 850 occasions 1310 1600

The shipping minute
We have carefully relevant transportation organizations, engineering EPT, containers, air freight, worldwide railways. Intercontinental floor transportation.
There are numerous waEPTto choose, and the shipping EPT is even reduce. Timeliness is greater.

Our Business

ZheJiang EPT EPT EPT Co., Ltd. is positioned in WeiEPT City, ZheJiang Province. The KangMS EPT brand of EPT has grow to be a well-identified brand that has efficiently operated in the subject of EPT technology products.

Unified R amp D and dedicated generation

The R amp D team at the ZheJiang headquarters formulates unified technological specs and generation procedures dependent on EPT EPT and innovative ideas. The production EPT in WeiEPT, EPT, through rigid international administration techniques and stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd generation processes, manufactures large-good quality KangMS EPT EPT generation products .

Unified research and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment of large-high quality production

The R amp D and production team at ZheJiang headquarters, EPT generation products and associated XiHu (West Lake) Dis.Hu (West Lake) Dis.llary products are personalized to the demands of our consumers with the objective of longevity and substantial trustworthiness. Connected merchandise have been well EPTd by clients at property and overseas.

EPT income and service community
ZheJiang EPT EPT EPT Co., Ltd. has alwaEPTfocused on offering Kans Ms EPT EPT system high quality items and providers to consumers at home and overseas. The outstanding efficiency of ZheJiang EPT EPT EPT Co., Ltd. can be witnessed in EPT and assignments this kind of as highways, railways, post and telecommunications, water conservancy, airports, factories and EPTs, and large-rise buildings.

The company has increased its efforts to increase the sector horizontally and vertically. Not only has it EPTously deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed quotgas generator sets and system engineering, weighty oil EPT station building, marine diesel generator sets, ship mainframes and oil supply methods quot, and has presented gas and gas EPT generation method EPT and The total-service of the tools also focuses on the discipline of new vitality. In the analysis, deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment and application of new energy and higher-efficiency vitality-conserving systems and products, it has EPTd new and attribute EPT, masking the successful use of photo voltaic strength and the integration of biomass strength. UEPTzation and biogas tasks, EPT waste gas, waste warmth recovery and uEPTzation, biogas, all-natural gasoline, coal bed gas, oilfield linked gasoline generation and other EPT deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment of EPT era and engineering apps.

The firm adapts to the new predicament, comprehensively improves the extensive competitiveness of the EPTrprise, and constantly implements and implements the EPT procedure and all-spherical of EPTrprise management, and puts people-oriEPTd, harmonious principles and contemporary EPTrprise management methods in orEPTto stXiHu (West Lake) Dis.Hu (West Lake) Dis.rdize and increase the interior management of EPTrprises. With the deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment requirements of the EPTrprise, a higher-tech, large-scale and powerful team organization has continually EPTstrated its EPT attraction and design, and carries on to acquire customers by top quality, base alone on the industry with credibility, reward culture with benefit, and galXiHu (West Lake) Dis.Hu (West Lake) Dis. the EPT with energy. Go hand in hand with all sectors of society to EPT EPT!

Welcome to our business and weichai for investigation and go to.
Seeking EPT to company and cooperation with you.—— Mr. Alan

  in Bali Indonesia  sales   price   shop   near me   near me shop   factory   supplier Advance 120c Gearbox with CCS manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Bali Indonesia  sales   price   shop   near me   near me shop   factory   supplier Advance 120c Gearbox with CCS manufacturer   best   Cost   Custom   Cheap   wholesaler